Transporting a Passenger

Pick Up Your Passenger

1. Start Trip: On the “Active” click “Start Trip”.

Note: Trip status will be changed to En Route.

2. Launch Map: Bambi will redirect to the default Directions App to your pickup location. Follow the on-screen directions to reach the passenger safely.

3. I’m at Pickup: Confirm you have arrived by hitting the “I’m at Pickup” button.
   
   • Note: Trip status will change to “I’m at Pickup”.

4. Confirm Passenger Identity and Load Passenger: Verify the passenger's identity upon arrival and safely load them into your vehicle.

5. Start Transporting Passenger: After safely loading passengers click “Start Transporting” and if required collect the passenger's signature for confirmation. If signature is not required press “Skip Signature”.

Note: Trip status is changed to Transporting.

Note: Passenger signature and geolocation can be required for billing and compliance purposes.

‍

Navigating to the Dropoff Destination

‍

Launch Map: Bambi will redirect to the default Directions App to your pickup location. Follow the on-screen directions to reach the passenger safely.

‍

Drop Off Your Passenger: Complete the Trip

‍

1. I’m at Dropoff: Click “I’m at Dropoff” to confirm that you have arrived at the dropoff location.

Note: Trip status is changed to “At Dropoff”.

2. Unload Passenger: Safely assist the passenger to exit the vehicle. 

3. Tap "Finish Trip": This button ends the trip

4. Confirm Trip Completion: Driver signs signature to confirm trip completion. Some companies may not require driver signatures, check with your management for requirements.

‍

Continuing your Shift

‍

Next Scheduled Trip: The next scheduled trip will automatically display on the  “Active” tab

Note: If you do not have any more assigned trips for the day then you can finish your shift. See next step